general purpose industrial vrs magnetic speed sensors description general purpose vrs sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. passive vrs (variable reluctance speed) magnetic speed sensors are simple, rugged devices that do not require an external voltage source for operation. a permanent magnet in the sensor establishes a fixed magnetic field. the approach and passing of a ferrous metal target near the sensor?s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. this change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. the output signal of a vrs sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (vp-p). one complete waveform (cycle) occurs as each target passes the sensor?s pole piece. if a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. honeywell also offers vrs sensors for high output, power output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions. features ? self-powered operation ? direct conversion of actuator speed to output frequency ? simple installation ? no moving parts ? designed for use over a wide range of speeds ? adaptable to a wide variety of configurations ? customized vrs products for unique speed sensing applications ? housing diameters: 5/8 in (m16), 3/8 in (m12) mm, 1/4 in (m8), 10/32 in ? housing materials/styles: stainless steel threaded or smooth ? terminations: ms3106 connector, preleaded ? output voltages: 8 vp-p to 40 vp-p potential applications ? engine rpm (revolutions per minute) measurement on aircraft, automobiles, boats, buses, trucks and rail vehicles ? motor rpm measurement on drills, grinders, lathes and automatic screw machines ? motor rpm measurement on precision camera, tape recording and motion picture equipment ? process speed measurement on food, textile, paper, woodworking, printing, tobacco and pharmaceutical industry machinery ? motor speed measurement of electrical generating equipment ? speed measurement of pumps, blowers, mixers, exhaust and ventilating fans ? flow measurement on turbine meters ? wheel-slip measurement on autos and locomotives ? gear speed measurement
general purpose 2 www.honeywell.com/sensing 5/8 inch (m16*) sensors (all dimensions for reference only. mm/[in]) *contact honeywell for availability of metric mounting thread versions. general specifications test condition specifications parameter characteristic parameter characteristic parameter characteristic min. output voltage 40 vp-p inductance 25 mh max. surface speed 25 m/s [1000 in/s] coil resistance 45 ohm to 85 ohm gear pitch range 24 dp (module 1.06) or coarser gear 20 dp (module 1.27) pole piece diameter 2,69 mm [0.106 in] optimum actuator 20 dp (module 1.27) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,50 m/s [20 in/s] typ. max. operating frequency 50 khz typ. operating temp. range -55 o c to 120 o c [-67 o f to 250 o f] vibration mil-std 202f method 204d mounting thread 5/8-18 unf-2a termination ms3106 connector load resistance 100 kohm catalog listing thread length (a) weight 3010an 3010an25 3010an30 3010an40 3010an50 28 mm [1.1 in] 63 mm [2.5 in] 76 mm [3.0 in] 101 mm [4.0 in] 127 mm [5.0 in] 70 g [2.5 oz] 84 g [3.0 oz] 84 g [3.0 oz] 98 g [3.5 oz] 128 g [4.5 oz] catalog listing thread length (a) weight 3010a 3010a25 35 mm [1.4 in] 63 mm [2.5 in] 70 g [2.5 oz] 84 g [3.0 oz]
industrial vrs magnetic speed sensors honeywell sensing and control 3 5/8 inch (m16*) sensors continued (all di mensions for reference only. mm/[in]) *contact honeywell for availability of metric mounting thread versions. general specifications test condition specifications parameter characteristic parameter characteristic parameter characteristic min. output voltage 40 vp-p inductance 25 mh max. surface speed 25 m/s [1000 in/s] coil resistance 45 ohm to 85 ohm gear pitch range 24 dp (module 1.06) or coarser gear 20 dp (module 1.27) pole piece diameter 2,69 mm [0.106 in] optimum actuator 20 dp (module 1.27) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,50 m/s [20 in/s] typ. max. operating frequency 50 khz typ. operating temp. range -55 o c to 120 o c [-67 o f to 250 o f] vibration mil-std 202f method 204d mounting thread 5/8-18 unf-2a termination 20 awg teflon- insulated leads load resistance 100 kohm catalog listing weight 3010h20 140 g [5.0 oz] catalog listing thread length (a) weight 3010s20 3010s30 50 mm [2.0 in] 76 mm [3.0 in] 70 g [2.5 oz] 84 g [3.0 oz]
general purpose 4 www.honeywell.com/sensing 3/8 inch (m12*) sensors *contact honeywell for availability of metric mounting thread versions. general specifications test condition specifications parameter characteristic parameter characteristic parameter characteristic min. output voltage 20 vp-p inductance 15 mh max. surface speed 25 m/s [1000 in/s] coil resistance 45 ohm to 65 ohm gear pitch range 26 dp (module 0.98) or coarser gear 20 dp (module 1.27) pole piece diameter 2,36 mm [0.093 in] optimum actuator 24 dp (module 1.06) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,50 m/s [20 in/s] typ. max. operating frequency 50 khz typ. operating temp. range -40 o c to 107 o c [-40 o f to 225 o f] vibration mil-std 202f method 204d mounting thread 3/8-24 unf-2a termination 24 awg vinyl-insulated leads load resistance 100 kohm catalog listing thread length (a) weight 3015a 3015a17 3015a35 20 mm [0.8 in] 44 mm [1.7 in] 88 mm [3.5 in] 28 g [1.0 oz] 35 g [1.2 oz] 42 g [1.5 oz] catalog listing weight 3015s13 28 g [1.0 oz] catalog listing thread length (a) weight 3015ss13 3015ss25 30 mm [1.2 in] 63 mm [2.5 in] 28 g [1.0 oz] 42 g [152 oz]
industrial vrs magnetic speed sensors honeywell sensing and control 5 1/4 inch (m8*) sensors (all dimensions for reference only. mm/[in]) *contact honeywell for availability of metric mounting thread versions. general specifications test condition specifications parameter characteristic parameter characteristic parameter characteristic min. output voltage 12 vp-p inductance 16 mh max. surface speed 25 m/s [1000 in/s] coil resistance 190 ohm max. gear pitch range 36 dp (module 0.70) or coarser gear 20 dp (module 1.27) pole piece diameter 1,00 mm [0.040 in] optimum actuator 28 dp (module 0.90) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,75 m/s [30 in/s] typ. max. operating frequency 60 khz typ. operating temp. range -40 o c to 107 o c [-40 o f to 225 o f] vibration mil-std 202f method 204d mounting thread 1/4-40 uns-2a termination 30 awg vinyl-insulated leads load resistance 100 kohm catalog listing thread length (a) weight 3050 3050a13 3050a20 15 mm [0.6 in] 30 mm [1.2 in] 50 mm [2.0 in] 14 g [0.5 oz] 14 g [0.5 oz] 14 g [0.5 oz] parameter characteristic parameter characteristic parameter characteristic min. output voltage 12 vp-p inductance 16 mh max. surface speed 25 m/s [1000 in/s] coil resistance 190 ohm max. gear pitch range 36 dp (module 0.70) or coarser gear 20 dp (module 1.27) pole piece diameter 1,00 mm [0.040 in] optimum actuator 28 dp (module 0.90) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,75 m/s [30 in/s] typ. max. operating frequency 60 khz typ. operating temp. range -40 o c to 107 o c [-40 o f to 225 o f] vibration mil-std 202f method 204d mounting thread 1/4-40 uns-2a termination 30 awg pvc-insulated leads load resistance 100 kohm catalog listing thread length weight 3050s10 25 mm [1.0 in] 14 g [0.5 oz]
general purpose 6 www.honeywell.com/sensing 10/32 inch sensors (all dimensions for reference only. mm/[in]) (no metric available.) general specifications test condition specifications parameter characteristic parameter characteristic parameter characteristic min. output voltage 8 vp-p inductance 14 mh max. surface speed 25 m/s [1000 in/s] coil resistance 155 ohm gear pitch range 32 dp (module 0.80) or coarser gear 20 dp (module 1.27) pole piece diameter 1,5 mm [0.062 in] optimum actuator 26 dp (module 0.98) ferrous metal gear air gap 0,127 mm [0.005 in] min. surface speed 0,75 m/s [30 in/s] typ. max. operating frequency 60 khz (typ.) operating temp. range -40 o c to 107 o c [-40 o f to 225 o f] vibration mil-std 202f method 204d mounting thread 10-32 unf-2a termination 32 awg teflon- insulated leads load resistance 100 kohm catalog listing thread length weight 3080 12 mm [0.5 in] 8,5 g [0.3 oz]
industrial vrs magnetic speed sensors honeywell sensing and control 7 this page intentionally left blank.
automation and control solutions sensing and control honeywell 1985 douglas drive north minneapolis, mn 55422 www.honeywe ll.com/sensing 005875-2-en il50 glo printed in usa november 2007 copyright ? 2007 honeywell international inc. all rights reserved. warning personal injury do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. warranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. honeywell?s standard product warranty applies unless agreed to otherwise by honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace, at its option, without charge those items it finds defective. the foregoing is buyer?s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. in no event shall honeywell be liable for consequential, special, or indirect damages. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. specifications may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. warning misuse of documentation ? the information presented in this product sheet is for reference only. do not use this document as a product installation guide. ? complete installation, operation, and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. sales and service honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. for application assistance, current specifications, pricing or name of the nearest authorized distributor, contact your local sales office or: e-mail: info.sc@honeywell.com internet: www.honeywell.com/sensing phone and fax: asia pacific +65 6355-2828 +65 6445-3033 fax europe +44 (0) 1698 481481 +44 (0) 1698 481676 fax latin america +1-305-805-8188 +1-305-883-8257 fax usa/canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 fax
|
